For a non-science graduate, a GAMSAT science passage can look difficult before you have even started reasoning through it.
An unfamiliar enzyme, a graph with several variables or a unit you have not used recently can quickly create the impression that you simply do not know enough science.
But that is not always the problem.
Sometimes you genuinely need more foundational knowledge. At other times, the information needed to answer the question is already in the stimulus, but you have not identified or used it correctly.
A more useful question is:
Do I lack the science, or am I struggling to reason from the information provided?
That distinction should shape what you practice next.
Current terminology note: ACER’s 2026 materials call the science component Reasoning in Biological and Physical Sciences. You may also encounter the term GAMSAT Section 3 in preparation searches. The current component contains 75 multiple-choice questions with 150 minutes of test time.
ACER states that non-science graduates can sit GAMSAT, but also warns that success is difficult without a sound foundation in the biological and physical sciences. It recommends specific preparation in relevant basic sciences for candidates without a science background.
This guide focuses on the bridge between those foundations and the reasoning you need to apply them.
All examples below are original instructional examples. They are not official, recalled or predicted GAMSAT questions.
Which Foundations Should You Check?
Reasoning in Biological and Physical Sciences currently draws on three discipline areas:
- Chemistry — 40%
- Biology — 40%
- Physics — 20%
ACER describes the expected subject knowledge as generally equivalent to first-year university biology and chemistry, and senior-secondary-level physics. However, the section also tests how well you can analyze data, identify relationships, apply hypotheses, evaluate evidence and use scientific knowledge in unfamiliar contexts.
For someone with a GAMSAT non-science background, that means preparation should not stop at memorizing content.
You need enough science to understand the problem, then enough reasoning skill to work with what the stimulus gives you.
Foundation Checklist
| Area | Check whether you can... | If not, start with... |
|---|---|---|
| Biology | Follow basic biological relationships and mechanisms | Targeted concept review |
| Chemistry | Apply foundational chemical relationships rather than only recall definitions | First-year foundation review |
| Physics | Work with basic quantities, relationships and units | Senior-secondary foundation review |
| Graphs and tables | Identify axes, variables, trends and comparisons | Short data-reading exercises |
| Mathematical relationships | Rearrange or apply a supplied relationship correctly | Focused quantitative practice |
| Experimental reasoning | Identify what changed, what was measured and what was controlled | Worked experiment examples |
| Evidence evaluation | Separate what the data support from what is only possible | Conclusion and evidence practice |
You do not need every area to feel effortless before attempting GAMSAT-style material.
The checklist is designed to show where the reasoning process breaks down.
What Level of Chemistry Is Needed for GAMSAT?
ACER states that chemistry knowledge generally corresponds to first-year university level.
That does not mean you need to reproduce an entire chemistry degree before beginning practice.
Instead, check whether you can do two things:
Understand the underlying concept.
and:
Use that concept when it appears inside an unfamiliar experiment, graph or table.
If the first is difficult, you probably have a conceptual gap.
If the first is comfortable but the second is difficult, the problem may be application or reasoning.
ACER recommends a bridging course for candidates who are not confident in a particular area such as chemistry, physics or biology.
How Do You Extract Information From a Scientific Passage?
Scientific passages often feel difficult because they contain unfamiliar names, terminology and experimental detail.
Do not assume every unfamiliar detail must be memorized or fully understood before you can answer the question.
Instead, identify the structure of the experiment.
Ask:
- What is being investigated?
- What was changed?
- What was measured?
- What was kept constant?
- What relationship does the question actually ask about?
ACER notes that GAMSAT questions can require candidates to interpret passages, graphical information, mathematical relationships and tables of data.
A useful first-pass framework is:
Context → variables → evidence → task
The following example shows how that works.
How Can You Use Graphs and Units?
Worked Experimental-Data Example
Researchers investigated the activity of an unfamiliar enzyme called ZQ-7.
ZQ-7 converts a substrate into a product. Researchers measured its reaction rate at four substrate concentrations under two pH conditions.
Temperature and enzyme concentration were kept constant throughout the experiment.
The results are shown below.
| Substrate concentration (mmol/L) | Reaction rate at pH 7 (μmol/min) | Reaction rate at pH 5 (μmol/min) |
|---|---|---|
| 1 | 5 | 3 |
| 2 | 9 | 5 |
| 4 | 14 | 7 |
| 8 | 15 | 7.5 |
If these values are plotted on a graph, both curves rise as substrate concentration increases, but the increase becomes much smaller at higher concentrations.
The pH 7 curve also remains above the pH 5 curve across the concentrations tested.
Before answering any question, separate what the passage gives you:
Changed: substrate concentration and pH
Measured: reaction rate
Kept constant: temperature and enzyme concentration
You do not need to know what ZQ-7 is outside this experiment.
Question 1 — Extract the Experimental Structure
Which variable was measured by the researchers?
A. pH
B. Temperature
C. Reaction rate
D. Substrate concentration
Correct answer: C.
The researchers changed substrate concentration and pH, then measured the resulting reaction rate.
Temperature was controlled.
This question requires almost no prior enzyme knowledge. The challenge is identifying the experimental roles of the variables.
Question 2 — Read the Graphical Relationship
Which statement best describes the pH 7 data?
A. Reaction rate decreases as substrate concentration increases.
B. Reaction rate increases at a constant rate across all concentrations.
C. Reaction rate increases, but the size of the increase becomes smaller at higher substrate concentrations.
D. Reaction rate becomes zero above 4 mmol/L.
Correct answer: C.
From 1 to 2 mmol/L, the rate rises from 5 to 9 μmol/min.
From 2 to 4 mmol/L, it rises from 9 to 14 μmol/min.
From 4 to 8 mmol/L, it increases only from 14 to 15 μmol/min.
The graph therefore rises and begins to flatten.
Why Are the Other Options Wrong?
A reverses the observed trend.
B ignores the changing size of the increases.
D directly contradicts the data because the reaction rate remains above zero.
Notice what this question actually required:
reading a relationship from data
not recalling the biochemical identity of ZQ-7.
Question 3 — Use the Units Correctly
Suppose another experiment reports a reaction rate of:
0.015 mmol/min
What is this rate in μmol/min?
A. 0.015 μmol/min
B. 1.5 μmol/min
C. 15 μmol/min
D. 150 μmol/min
Correct answer: C.
Because:
1 mmol = 1,000 μmol
then:
0.015 × 1,000 = 15 μmol/min
The underlying science is not the difficult part here.
The problem depends on recognizing and converting the units correctly.
This is why useful GAMSAT graphs practice should include axes, scales, units and relationships rather than only identifying whether a line goes up or down.
Question 4 — Do Not Claim More Than the Evidence Supports
Which conclusion is best supported?
A. ZQ-7 always functions better at pH 7 than at every other pH.
B. Under the conditions tested, ZQ-7 had a higher reaction rate at pH 7 than at pH 5.
C. All enzymes function best at pH 7.
D. pH is the only factor that affects ZQ-7 activity.
Correct answer: B.
The experiment compared only pH 5 and pH 7 under the conditions shown.
The data support a comparison between those two conditions.
They do not establish that pH 7 is optimal among every possible pH, that all enzymes behave the same way or that no other variable affects the enzyme.
This distinction is central to scientific reasoning:
Describe what the evidence supports before explaining more than the experiment actually shows.
What Did This Example Really Test?
The four questions required different things.
| Question | Main demand |
|---|---|
| 1 | Identify experimental variables |
| 2 | Interpret a graph/data trend |
| 3 | Convert units |
| 4 | Evaluate the limits of evidence |
Only some of that depends heavily on prior science knowledge.
That is why a passage that looks scientifically unfamiliar is not automatically a knowledge problem.
How Do You Distinguish Knowledge Gaps From Reasoning Errors?
When you miss a question, recording only:
“Science is weak.”
does not tell you what to practice next.
Instead, classify the failure.
Conceptual Gap
You do not understand the scientific idea required to engage with the question.
For example, you cannot interpret a question involving pH because you do not understand what pH represents.
What to do next:
Return to the foundation, learn the concept clearly, practice a few simple applications and then revisit passage-based questions.
Reasoning Error
You understand the relevant science but use the stimulus incorrectly.
For example, you know how concentration works but compare the wrong two values in a table.
What to do next:
Reconstruct the reasoning chain, identify the information you overlooked and complete similar data-based problems.
Graph or Unit Error
You understand the science but misread:
- an axis;
- a scale;
- a unit;
- a ratio;
- or a mathematical relationship.
What to do next:
Practice that operation in isolation, then place it back inside scientific questions.
Evidence Error
You choose a conclusion stronger than the data justify.
What to do next:
Ask:
What does the experiment actually demonstrate, and what would require additional evidence?
Use Your Error Pattern
After several practice sets, your errors should tell you what kind of preparation you need.
| If most errors are... | Your next priority is more likely to be... |
|---|---|
| Conceptual | Foundation building |
| Graph or unit based | Targeted data and quantitative practice |
| Reasoning based | Scientific stimulus interpretation |
| Evidence based | Conclusion and experimental reasoning |
| Timing based | Faster recognition and decision-making |
This is more useful than simply increasing the number of questions you complete.
For a full preparation framework covering all GAMSAT components, study stages and practice resources, see Icon Education’s How to Prepare for the GAMSAT: Study Plan, Questions and Resources.
Final Takeaway
Preparing for GAMSAT with a non-science background requires science knowledge, but it also requires knowing when science knowledge is actually the problem.
Use the following sequence:
check the foundation → identify the variables → extract the evidence → read the graph and units → answer only what the data support → diagnose the error
When a question goes wrong, ask:
Did I lack the science, or did I misuse the information?
If you can answer that accurately, your next study decision becomes much clearer.
Build your science foundations and reasoning skills with a GAMSAT coach.